A4 DTF Custom print

A4 DTF Custom print

Our transfers can press to cotton, silk, polyester, denim, and more. In addition, our transfers work on both white and dark garments.

All you need is a heat press and the garment or substrate.
Please upload a high-resolution 300dpi PNG with transparent background to our online designer.
We do not take responsibility for the print quality if images lower than 300 dpi are uploaded.
DO NOT mirror your artwork; we will do this before printing.

Purchase one metre of DTF prints which are printed and sent the same day if ordered before 11 am. 

You need to upload the artwork on product page or check-out page. Artwork printed as given; we will not check/resize or edit your files in any way. We print with a 3-pixel choke (0.0508 mm). Therefore, lines under 6 pixels (0.1016mm) will not receive white ink coverage and adherence.

Simply cut out your desired print, align and tape it onto the garment. Then press the garment for 15 seconds at 150 degrees Celsius with high pressure and a pressing pillow to ensure even pressure across the entire print.

Allow the print to cool (1-2 mins) before peeling the film off. Finally, press for another 7 seconds @ 150 with a sheet of baking paper on top.

What’s Included

One metre of DTF prints cured with melt powder ready for pressing.

Tips

Stay within the CMYK colour range; you will not achieve the highly bright colours your monitor can perform.

Do not design with elements that are less than 6 pixels wide.

For breathing and the best feel, if going on a black t-shirt, knock out the Black content and use the shirt for that colour (leave it transparent).

For the best feel, please stay away from full solid block designs; whilst our prints are a great feel and are very thin to the tough, the feeling is dramatically improved when the print has open areas.

Images must be supplied in PNG, SVG, AI, PSD, or EPS format. A4 size at 300DPI.